Products

Sold in pairs (Will do 2 doors) Sewn over ends Zinc Plated Brackets Comes with all mounting Hardware

Can-Am Maverick X3 / X3 Max chromoly dual bar rear bumper with rear tie down tabs mounts.Extreme desert Style bumper – is completely constructed fr...

2017-present CAN-AM x3 / x3 Max HD tie rods 4130 Chromoly rods 17-4 High misalignment spacers FK Chromoly hiem joints Comes with everything you n...

Can Am X3 / X3 Max Lower ValanceLaser cut aluminum.This valance kit can be installed on our X3 or X3 Max cage with nofabrication.Held in place with...

This part extends the pad part of the pedal to the left so you can drive with 2 feet.Powdercoated black with grip tape on the foot side.This is a s...

Can-Am Maverick X3 / X3 Max chromoly low mount spare tire carrier rear bumper with tie down tabs mounts. This bumper mounts your spare tire down lo...

Can-Am Maverick X3 - Front Single Tube Replacement BumperExtreme Desert Style Bumpers – Are Completely Constructed From 4130Chromoly Tubing, That’s...

Can-Am Maverick X3 Chromoly Single Bar Rear Bumper (2017 - Present) Extreme desert style bumpers are completely constructed from 4130 chromoly tubi...

Can Am X3 / X3 Max Upper Visor Laser cut aluminum. This visor kit can be installed on our X3 or X3 Max cage with no fabrication. Comes with all mou...

Will Fit: 2017-2018 Can AM X3 Front DoorsFront Doors OnlyProtect their knees and add storage to your factory doors with PRP Seats’ Stock Rear Door ...

Can-Am X3 / X3 Max - Push to Talk Grab Handle Mount Compatible with Rugged PTT-HM-SC or PCI 5306 Grip not provided PTT button not provided Billet A...

This is a "Replacement Brake Pade for Front or Rear Caliper" for our Can Am X3 Big Brake Kit This kit will do 2 calipers (4 pads) Will work for Dri...

This is a "Replacement Front Caliper" for our Can Am X3 Big Brake Kit 4 Piston - 1.380 Will work for Driver or Passenger side Does not include brak...

This is a "Replacement Rear Caliper" for our Can Am X3 Big Brake Kit 4 Piston - 1.125 Will work for Driver or Passenger side Does not include brake...

This is a "Replacement Rotor" for our Can Am X3 Big Brake Kit 12″ Rotor Fits Front and Rear     Note: ONLY works with 15″ or bigger wheels

Extreme bumpers are completely constructed from 4130 Chromoly tubing, that’s not only stronger but lighter than other steel typically used for bump...

Extreme bumpers are completely constructed from 4130 Chromoly tubing, that’s not only stronger but lighter than other steel typically used for bump...

4130 Chromoly 1.25” Rods. Chromoly Hex Inserts so you can put a wrench on the rod while tightening hiem. Chromoly FK Bearing 3/4" Hiem Joints. Sta...

4130 Chromoly 1.25” Rods. Chromoly Hex Inserts so you can put a wrench on the rod while tightening hiem. Chromoly FK Bearing 5/8" Hiem Joints. Sta...

This is our factory replacement trailing arm for the 72″ models, or youcan upgrade your standard or XDS model with these. 100% Chromoly 100% Tig We...

Can Am X3 XRS Shock Tower Relocator This Shock Tower is not only a brace that ties the tower into the chassis but it moves the shocks out and up to...

Can Am X3 XRS Shock Tower Repair Kit This is for the person that did not install our Shock Tower kit already and had the stock tower break off. Thi...

Front CV Rock Guards Kit comes with 2 brackets, 2 Rubber Guards and all necessary hardware. Note: Please specify if you have Stock brakes or our Bi...

Powdercoated Black Sits under the passenger seat Can be used with the slider Can be used in the lower position Can be used with a single or dual b...

DO YOU HAVE A LIMP BED? Some Mfg's out there are building cages that don’t tie into the factory location on the X3. Not realizing that that support...

This registration plate mounts to the rear facia with supplied hardware. It works great for a California Offroad Sticker or an out of state sticker...

Powdercoated Black Sits under the passenger rear seat Can be used with a single or dual battery set up Set up to use the True UTV-SBI-15 Battery I...

Aluminum Full Doors, which fit the stock frames. 30 Min install after doors are assembled.

Protect your SXS from unexpected damage and increase chassis rigidity with our chromoly Nerf Bars! 100% Tig welded chromoly Billet caps All hardwar...

Can-Am Maverick X3 Max - 4 Seat Chromoly CageExtreme desert style cage – is completely constructed from 4130 chromoly tubing, that’s not only stron...

Extreme desert style modular roof rack – constructed from .090 6061-t6, slotted on all 4 sides to give you fully functional tie down capability. We...

Will Fit: 2017-2018 Can Am Max Rear DoorsRear Doors OnlyProtect their knees and add storage to your factory doors with PRP Seats’ Stock Rear Door B...

X3 MAX - NRG SHIELD 4 SEAT SLIDER KIT Kit includes custom designed seat sliders for NRG SHIELD seats.

*Rear LEFT / RIGHT AxlesThrough years of research and development Demon Powersports has developed a RACE-READY ULTIMATE PERFORMANCE axle that doesn...

"Driver Front Axle" Through years of research and development Demon Powersports has developed a RACE-READY ULTIMATE PERFORMANCE axle that doesn’t b...

*Passenger Front Axle*Through years of research and development Demon Powersports has developed a RACE-READY ULTIMATE PERFORMANCE axle that doesn’t...

CBR Performance Radiator for your Extreme Performance Sandcar / Sandrail Fitment: DTD 2 Comes with fittings in factory locations Comes with ...

CBR Performance Radiator for your Extreme Performance Sandcar / Sandrail Fitment: Eco 1, DTD 1 Comes with fittings in factory locations Come...

CBR Performance Radiator for your Extreme Performance Sandcar / Sandrail Fitment: Eco 2 Comes with fittings in factory locations Comes with ...

CBR Performance Radiator for your Extreme Performance Sandcar / Sandrail Fitment: Platinum Comes with fittings in factory locations Comes wi...

Crow Safety 2×2 Harness for Polaris RZR170* This harness is custom made to fit children and install in a RZR 170.* Comes with sewn in pads* Sold “E...

Crow 2" V-Harness with 3" Lap Belt and is made to go in the rear seat of an Extreme Performance Sandrail.  Sold “Each” (will do one seat) Made in t...

Crow 3x2 4 Way Seat Belt Harness with Latch and Link Style Buckle.These Seat Belt Restraints Are Ideal for Recreational Use and Are Not Recommended...

Crow 3" V-Harness with 3" Lap Belt and is made to go in the front seat of an Extreme Performance Sandrail.  Sold “Each” (will do one seat) Made in ...

DR1 CHASSIS PACKAGE 1                                                                          CHROMOLY CHASSIS FULLY TIG WELDED                   ...

DR1 CHASSIS PACKAGE 2 BASE CHASSIS CHROMOLY CHASSIS FULLY TIG WELDED                                                                               ...

Dimensions:                 Wheel Base - 148"                                           Front Width - 87" @ Ride Height                            ...

DragonFire has revolutionized mounting UTV harnesses in factory seats with the introduction of the UTV Harness Pass-Through Bezel for Polaris RZR m...