Can-Am Maverick X3

Extreme desert style cage is completely constructed from 4130 chromoly tubing, that’s not only stronger but lighter than other steel typically used...

Laser cut aluminum 3d windshield frame with auto style tempered glass.This windshield kit can be install on any of our X3 or X3 Max cages with no f...

Aluminum full doors which fit the stock frames.  Fitment: Can Am 2 Seat X3, XRS, Turbo RR, XRC, XDS  30 minute install after doors are assembled.

Sold in pairs (Will do 2 doors) Sewn over ends Zinc Plated Brackets Comes with all mounting Hardware

Will Fit: 2017-2018 Can AM X3 Front DoorsFront Doors OnlyProtect their knees and add storage to your factory doors with PRP Seats’ Stock Rear Door ...

Sold in pairs (Passenger and Drivers) Chromoly Tube Frame Powdercoated Black SFI Certified Nets Comes with all mounting Hardware NOTES: ONLY WORKS ...

Can Am X3 / X3 Max Upper Visor Laser cut aluminum. This visor kit can be installed on our X3 or X3 Max cage with no fabrication. Comes with all mou...

Can Am X3 / X3 Max Lower ValanceLaser cut aluminum.This valance kit can be installed on our X3 or X3 Max cage with nofabrication.Held in place with...

Extreme desert style modular roof rack – constructed from .090 6061-t6, slotted on all 4 sides to give you fully functional tie down capability. We...

Bolts up directly to Extreme Performance roll cages except for Kawaski KRX. Side Mirror Kit Sold as a pair. Bolts to LED bar Tabs. Sold Raw or Powd...

Can Am X3 Lowrider Cage * 100% Chromoly fabricated in California, USA * 1.75″ diameter .083 wall chromoly tubing * All tig welded * Integrated V-Br...

  This is a Aluminum Roof with Lexan inserts on both passenger and drivers side. These will make it easier to see as you approach a hill. A lot of ...

Laser cut aluminum number plate kit. This number plates can be installed on any of our X3 or X3 Max cages with no fabrication. Sold raw at this pri...

Can Am X3 Center Dash Takes place of the center uprights in the dash and is completely bolt in. Comes powder coated texture black with offset Color...

Can Am X3 Chromoly Front Sub Frame KitIts no secret the front of these cars are really weak. No more doing acomplete frame swap for front end frame...

Can Am X3 XRS Shock Tower Relocator This Shock Tower is not only a brace that ties the tower into the chassis but it moves the shocks out and up to...

Can Am X3 XRS Shock Tower Repair Kit This is for the person that did not install our Shock Tower kit already and had the stock tower break off. Thi...

These arms fit the Can Am XRS 72″ Models Has the factory steering stops to prevent over extending the axles 4130 Chromoly 100% Tig Welded Comes w/ ...

If you are looking at this part you already know what happens to the factory mount. This Transmission Mount / Cross Member is made from Chromoly an...

These arms fit the Can Am XRS 72” Models 4130 Chromoly Laser Cut Uses OEM Bal Joint and Grease Zerks

Can Am X3 Demon Chromoly Lower Ball JointDemon Heavy Duty Ball Joints pn# PABJ-5006 HD* Made Up of 4340 Chromoly Steel Material* Greaseable and Ser...

Can Am X3 Demon Chromoly Upper Ball JointDemon Heavy Duty Ball Joints pn# PABJ-5008 HD* Made Up of 4340 Chromoly Steel Material* Greaseable and Ser...

This is our factory replacement trailing arm for the 72″ models, or youcan upgrade your standard or XDS model with these. 100% Chromoly 100% Tig We...

AIN14T-770 Monoball - Uniball  You can use this part in many different places, We use them specifically for our Can Am X3 Chromoly Trailing Arms. S...

Front CV Rock Guards Kit comes with 2 brackets, 2 Rubber Guards and all necessary hardware. Note: Please specify if you have Stock brakes or our Bi...

2017-present CAN-AM x3 / x3 Max HD tie rods 4130 Chromoly rods 17-4 High misalignment spacers FK Chromoly hiem joints Comes with everything you n...

This allows you to screw the bolts in from the front side for the lower BulkHead and Lower Arms. The plate is bolted in and stays in place while ho...

Can-am Maverick X3 Chromoly Weld On Gusset Kit

Can Am X3 Chromoly Weld On Passenger Steering Rack Gusset Its a common problem for the factory steering rack mount to crack on a stock unit. We mad...

Can Am X3 Bushing Kit Black Nylon Chromoly Pivot Tubes Sold as Set Replaces the factory prone to failure bushings

Can-am maverick x3 lower a-arm taco kit – these help prevent the stock lower a-arm from folding.2 – weld in cross rods2 – weld in lower a-arm sleev...

Can Am Knuckles The 7075 X3 Front Double Shear Capped Knuckle Set is the perfect upgrade for your Can Am X3. The 7075 material is 3x stronger than ...

Cam Am X3  Rear Knuckles  Ultimate Strength Added To Middle Radius Rod  Teflon Lined Spherical Bearings  72,000 lbs Of Force Here is the ultimate...

Our links are made from 6061 T6 Aluminum Billet Hex Material so you can get a wrench on it to adjust them. The Heim reducers are made from 17-4 Sta...

* These 3 plates go behind the rear bulk head and strengthen thefactory chassis. The also stay in place which makes it a lot easier tochange one or...

4130 Chromoly 1.25” Rods. Chromoly Hex Inserts so you can put a wrench on the rod while tightening hiem. Chromoly FK Bearing 5/8" Hiem Joints. Sta...

The Strongest aftermarket Radius Rod Kit available for your Can Am Maverick X3 / X3 Max. Made for OEM 64" Width Suspension. 4130 chromoly 1.25” rod...

4130 Chromoly 1.25” Rods. Chromoly Hex Inserts so you can put a wrench on the rod while tightening hiem. Chromoly FK Bearing 3/4" Hiem Joints. Sta...

Extreme Desert Style Radius Rod Support Plates – Is Completely Constructed From 4130 Chromoly, That’s NotOnly Stronger But Lighter Than Other Steel...

Can Am X3 Rear Shock Tower Brace KitMade to prevent cracking on the upper shock towers.If you see the powdercoating cracking on your upper rear sho...

Can Am X3 Eibach Spring Kit PRO-UTV – Stage 3 Performance Spring System (Set of 8 Springs)CAN-AMMaverick X3 X RS Turbo R Pn# E85-212-006-03-22

Can Am X3 Big Brake KitBiggest Rotors Available. 12″ Front and Rear!4 Piston Wilwood CalipersComplete bolt on kitResidual ValvesONLY works with 15″...

This is a "Replacement Rotor" for our Can Am X3 Big Brake Kit 12″ Rotor Fits Front and Rear     Note: ONLY works with 15″ or bigger wheels

This is a "Replacement Front Caliper" for our Can Am X3 Big Brake Kit 4 Piston - 1.380 Will work for Driver or Passenger side Does not include brak...

This is a "Replacement Rear Caliper" for our Can Am X3 Big Brake Kit 4 Piston - 1.125 Will work for Driver or Passenger side Does not include brake...

This is a "Replacement Brake Pade for Front or Rear Caliper" for our Can Am X3 Big Brake Kit This kit will do 2 calipers (4 pads) Will work for Dri...

These mount to the lower rear trailing arms and offer protection against rocks entering the wheel inner area. Which can cause wheel and brake damag...

This part extends the pad part of the pedal to the left so you can drive with 2 feet.Powdercoated black with grip tape on the foot side.This is a s...