Purpose-Built Maverick R Performance

Upgrade the rear radius-rod system on a Can-Am Maverick R with 1.25-inch 4130 chromoly rods, 3/4-inch chromoly heim joints, stainless reducers, and chromoly hub double-shear brackets. The lower two rods use solid construction with aluminum inserts.

Product at a Glance

Vehicle Fitment

Can-Am Maverick R factory rear radius-rod mounting locations

Included / Key Components

• 4130 chromoly radius rods
• Chromoly 3/4-inch heim joints
• 303 stainless heim reducers
• Chromoly hub double-shear brackets
• 2 new Grade 8 bolts for the reamed knuckle holes

Important Notes

• The knuckle must be reamed to 9/16 inch because the factory bolt is tapered.
• Fits the factory location without cutting or grinding.

Frequently Asked Questions

What vehicle is this product designed for?

Can-Am Maverick R factory rear radius-rod mounting locations

What is included?

4130 chromoly radius rods; Chromoly 3/4-inch heim joints; 303 stainless heim reducers; Chromoly hub double-shear brackets; 2 new Grade 8 bolts for the reamed knuckle holes

Are there important ordering, fitment, or installation notes?

The knuckle must be reamed to 9/16 inch because the factory bolt is tapered. Fits the factory location without cutting or grinding.

Full Product Details

• 4130 Chromoly 1.25” Rods.
• Lower 2 Rods are Solid with Aluminum Insert
• Chromoly Hex Inserts so you can put a wrench on the rod while tightening hiem.
• Chromoly 3/4" Hiem Joints.
• Stainless 303 Heim Reducers with Large Footprint for Extra Strength.
• Right and Left Hand hiems so you can adjust them while installed.
• Fits in the factory location without any cutting or grinding.
• These are the strongest Rods on the market. Chromoly has a lot more rigidity than aluminum rods.
• Chromoly Hub Double Shear Brackets

NOTE: Knuckle with need to be reamed to 9/16" as the factory bolt is tapered. (We supply 2 new Grade 8 bolts for these holes)