Suspension

Extreme Lower Arm Bushing Kit 8 Nylon Bushing 4 Pivot Pins  

Extreme Upper Arm Bushing Kit 8 Nylon Bushing 4 Pivot Pins  

Can-Am Maverick R - Extreme Chromoly Rear Toe Link Double Shear Kit This goes on the middle Radius Rod on the outside at the hub and takes it from ...

Radius Rod Support Plate. Completely Constructed From 4130 Chromoly, That’s NotOnly Stronger But Lighter Than Other Steel Typically Used For Constr...

Our links are made from 6061 T6 Aluminum Billet Hex Material so you can get a wrench on it to adjust them. The Heim reducers are made from 17-4 Sta...

These arms fit the Can Am XRS 72″ Models Has the factory steering stops to prevent over extending the axles 4130 Chromoly 100% Tig Welded Comes w/ ...

These arms fit the Can Am XRS 72” Models 4130 Chromoly Laser Cut Uses OEM Bal Joint and Grease Zerks

Front CV Rock Guards Kit comes with 2 brackets, 2 Rubber Guards and all necessary hardware. Note: Please specify if you have Stock brakes or our Bi...

This is our factory replacement trailing arm for the 72″ models, or youcan upgrade your standard or XDS model with these. 100% Chromoly 100% Tig We...

Extreme Desert Style Radius Rod Support Plates – Is Completely Constructed From 4130 Chromoly, That’s NotOnly Stronger But Lighter Than Other Steel...

4130 Chromoly 1.25” Rods. Chromoly Hex Inserts so you can put a wrench on the rod while tightening hiem. Chromoly FK Bearing 3/4" Hiem Joints. Sta...

Can-am Maverick X3 Chromoly Weld On Gusset Kit

Can Am X3 Bushing Kit Black Nylon Chromoly Pivot Tubes Sold as Set Replaces the factory prone to failure bushings

This allows you to screw the bolts in from the front side for the lower BulkHead and Lower Arms. The plate is bolted in and stays in place while ho...

Can-am maverick x3 lower a-arm taco kit – these help prevent the stock lower a-arm from folding.2 – weld in cross rods2 – weld in lower a-arm sleev...

* These 3 plates go behind the rear bulk head and strengthen thefactory chassis. The also stay in place which makes it a lot easier tochange one or...

Can Am X3 Rear Shock Tower Brace KitMade to prevent cracking on the upper shock towers.If you see the powdercoating cracking on your upper rear sho...

Our links are made from 6061 T6 Aluminum Billet Hex Material so you can get a wrench on it to adjust them. The Heim reducers are made from 17-4 Sta...

Can Am X3 Chromoly Weld On Passenger Steering Rack Gusset Its a common problem for the factory steering rack mount to crack on a stock unit. We mad...

The Strongest aftermarket Radius Rod Kit available for your Can Am Maverick X3 / X3 Max. Made for OEM 64" Width Suspension. 4130 chromoly 1.25” rod...

2017-present CAN-AM x3 / x3 Max HD tie rods 4130 Chromoly rods 17-4 High misalignment spacers FK Chromoly hiem joints Comes with everything you n...

4130 Chromoly 1.25” Rods. Chromoly Hex Inserts so you can put a wrench on the rod while tightening hiem. Chromoly FK Bearing 5/8" Hiem Joints. Sta...

Can Am X3 XRS Shock Tower Relocator This Shock Tower is not only a brace that ties the tower into the chassis but it moves the shocks out and up to...

Can Am X3 XRS Shock Tower Repair Kit This is for the person that did not install our Shock Tower kit already and had the stock tower break off. Thi...