Sandcar / Sandrail Parts

Dimensions:                 Wheel Base - 148"                                           Front Width - 87" @ Ride Height                            ...

DR1 CHASSIS PACKAGE 1                                                                          CHROMOLY CHASSIS FULLY TIG WELDED                   ...

DR1 CHASSIS PACKAGE 2 BASE CHASSIS CHROMOLY CHASSIS FULLY TIG WELDED                                                                               ...

Eco 2 / Eco 3 Chromoly Spindle with King Kong Spindle Snout Sold Raw as seen in pictures. Sold each (ONE spindle) Does not include spindle nut Powe...

Eco 2 / Eco 3 Chromoly 2" Spindle  Sold Raw as seen in pictures. Sold each (ONE Spindle) Available in DRIVER or PASSENGER please specify which side...

This Replacement Lower A-Arm is for an Eco 3 Sandcar. However we can provide the correct shock spacers to fit an Eco 2 car as well. Sold Raw as see...

Extreme 934 Micro Stub Kit 11" Rotors  4 Piston Wilwood Calipers Brake Pads Spindle Nuts (Right and Left) NOTE: These do not come with the actual s...

Extreme 934 Micro Stub Kit 11" Rotors  4 Piston Wilwood Calipers 3 Bolt  NOTE: These are not a direct bolt up to our older cars. You would need to ...

We make these LS Coil Covers 100% IN HOUSE, right down to the cap on the filler. We carry them in some colors but you can specify your colors and w...

CBR Performance Radiator for your Extreme Performance Sandcar / Sandrail Fitment: Eco 1, DTD 1 Comes with fittings in factory locations Come...

CBR Performance Radiator for your Extreme Performance Sandcar / Sandrail Fitment: Eco 2 Comes with fittings in factory locations Comes with ...

CBR Performance Radiator for your Extreme Performance Sandcar / Sandrail Fitment: DTD 2 Comes with fittings in factory locations Comes with ...

CBR Performance Radiator for your Extreme Performance Sandcar / Sandrail Fitment: Platinum Comes with fittings in factory locations Comes wi...

Spal 30102120 High Performance 16" Straight Blade Puller Radiator Fans 1918 CFM Specs: 10 Straight blades Puller Uses FRPT plug 1918 CFM at '0' ...

Brand: SPAL Automotive USA Manufacturer's Part Number: IX-30102029 Part Type: Fans, Electric Product Line: Spal Electric Fans Summit Racing Part Nu...

Cycling Capacity 20 hour rate 28 Amp Hours Reserve Capacity @ 25 Amps 50 minutes @ 75 Amps 6 minutes Mechanic...

Weldon A600-A (-10 inlet & outlet) Flow Through Fuel Pump -Extremely quiet-Smooth, precise fuel delivery-Extremely low current draw-Self Primin...

Weldon 1100-A Electric Fuel Pump 1100-A Fuel Injected Engines: 1400 HP @ 50 PSI (Naturally Aspirated) 1000 HP at 80 PSI (Boosted) Carburet...

AEM Electronics High-Flow External Electric Fuel Pumps 50-1005 UPC: 840879024086Fuel Pump Type: Electric externalFuel Pump Voltage: 12 VFlow Rate: ...

Weldon A2040 Series Bypass Regulators A2040-281-A-120 Pressure Range (psi): 0-110Regulator Style: ReturnRegulator Location: InlineBoost/Vacuum Refe...

Black in color Two -10AN inlet ports and one -6AN return port Gasoline, diesel, methanol, and ethanol fuel compatible Billet Aluminum with anodize...

Black in color Two -6AN inlet ports and one -6AN return port Gasoline, diesel, methanol, and ethanol fuel compatible Billet Aluminum with anodize ...

Weldon Billet Fuel FiltersManufacturer’s Part Number: WEQ1010CLNFuel Filter Style: InlineInlet Quantity: OneInlet Size: -10 AN O-ringInlet Attachme...

10AN inlet/outlet Fuelab Filter with short (3 inch) 10 micron / Paper Element (Cellulose) Filter Features Compact design supports 200 GPH Gasoline...

10AN inlet/ 8AN outlet Fuelab Filter with short (3 inch) 10 micron / Paper Element (Cellulose) Filter Features Compact design supports 200 GPH Gas...

FUELAB Replacement Fuel Filter Element 71801This element will work in most of our sandrails with the Fuellab fuelfilter.

OTR air filters offer unmatched engine protection and easy maintenance in a long-life, oil-free, high-performance air filter. Tough, synthetic fibe...

This Pre-Filter that fits Air Filter CO10537S We use this filter on out Sandcar line.  NOTE: We sell the Air Filter Separately on our website. 

OTR air filters offer unmatched engine protection and easy maintenance in a long-life, oil-free, high-performance air filter. Tough, synthetic fibe...

This Pre-Filter that fits Air Filter CO10558S We use this filter on out Sandcar line.  NOTE: We sell the Air Filter Separately on our website. 

  IMI Performance 104 1.6HP 12V High Torque Starter For 6 Rib 091 Or 094 Bus For 12V Flywheel This starter is self supporting. In a VW transmission...

IMI-101N Starter This unit is designed for a Volkswagen application using a type Itransmission. This is the high output version of the IMI-101. Thi...

IMI-101NL Starter (Longer Snout) This unit is designed for a Volkswagen application using a type Itransmission. This is the high output version of ...

 Empi 930 CV Inner Cage Chromoly - 16-2615 Sold each.   

   Empi Metal Flange for 930 Over the C.V. Boot. 86-9313 Note: This flange will go over the bolts and use the bigger style boot. (boot or clamp not...

EMPI 930 CV BOOT PN 86-9301 We use these boots on all of our Sandrails with 930 Axles. (SOLD AS A SET OF 4)  

 934 CV Bolt Kit - Comes with 24 Bolts 7/16 - 20 12 Point    Note: We can combine shipping with other items.

  930 CV Bolt Kit - Comes with 24 Bolts 3/8" - 24 x 2 1/4" 12 Point    Note: We can combine shipping with other items.

930 Universal CV Boot Clamp  Sold each  Note: We can combine shipping with other items.

Standard grade, 2 piece, 3/4 LH Male Rodend w/PTFE. Teflon lined. Left hand thread. Jam nuts sold separately. Sold individually. Made in the USA.

Standard grade, 2 piece, 3/4 RH Male Rodend w/PTFE. Teflon lined. Right hand thread. Jam nuts sold separately. Sold individually. Made in the USA.

FK JMXL12T High Strength Alloy 3/4 LH Male Rodend w/PTFE. Teflon lined so they don’t squeak. Right hand thread. Jam nuts sold separately. Sold indi...

FK JMX12T High Strength Alloy 3/4 RH Male Rodend w/PTFE. Teflon lined so they don’t squeak. Right hand thread. Jam nuts sold separately. Sold indiv...

FK JMX14T-770 High Strength Alloy RH Male Rodend w/PTFE. Fits a 7/8-14 threaded bung. Teflon lined so they don’t squeak. Right hand thread. Jam nut...

FK Bearing SJNR14 RH 7/8 Steel Jam Nut This is the Jam Nut you would use on a FK JMXT14T-770 RH Male Rodend. Right hand thread. Rodends sold separa...

FK Bearing SJNR12 RH 3/4 Steel Jam Nut Right hand thread. Rodends sold separately. Sold individually. Made in the USA. We use this exact part on ou...

FK Bearing SJNL12 LH 3/4 Steel Jam Nut Left hand thread. Rodends sold separately. Sold individually. Made in the USA. We use this exact part on our...

AIN14T-770 Monoball - Uniball  You can use this part in many different places, We use them specifically for our Can Am X3 Chromoly Trailing Arms. S...